Designing a laser engraving machine

From the first sketch to the finished trade show highlight

A compact engraving machine that customises advertising materials and signs live was developed for mobile use at trade shows. The aim of the design: High reliability, low maintenance and rapid spare parts supply through the use of standard components.

°

⚙️ Technical design & functioning principle

The machine is designed as a classic gantry system (portal design). With external dimensions of ca.. 400 x 400 x 400 mm, it is optimal for transport, but still offers a working area of 200 x 200 mm.

The 3-axis system

• X and Y axis: These axes control horizontal positioning. The drive is via NEMA17 stepper motors and toothed belts (HTD 3M profile), which enables speeds of up to 330 mm/s.

• Z axis: Used for precise laser focusing. A ball screw with a 2 mm pitch is used here which, due to the motor torque is self-holding when still.

The laser system

An Atomstack R30 V2 infrared fibre laser is installed. This works without contact and is suitable for a wide range of materials (metals, plastics, glass, wood). With a service life of up to 100,000 hours, the system is practically maintenance-free.

The machine shows that industrial quality can be achieved through the consistent use of standard parts without having to rely on custom-made products. This not only simplifies the initial design, but also ensures long-term maintenance and spare parts procurement.

"Standard components make maintenance easier - a decisive factor for devices that have to withstand continuous operation at trade shows."

Nico,°Project Manager Product Development

💻 Diseño e integración CAD

Una parte importante del tiempo de desarrollo se ahorró utilizando CAD en Autodesk Inventor. Como norelem proporciona conjuntos de datos 3D de dimensiones exactas para casi todos los componentes, ya no fue necesario modelar manualmente las piezas estándar.

Ventajas para la planificación de proyectos:

• Comprobación de colisiones: control directo de los espacios de movimiento en el modelo digital.

• Listas de piezas: creación automatizada para un aprovisionamiento sin errores.

• Prueba de tolerancias de montaje: para garantizar la capacidad de montaje antes del primer pedido.

También puede utilizar nuestras descargas CAD gratuitas directamente en su herramienta de diseño. Así se reducen las fuentes de error ya desde la fase de planificación, lo que agiliza además los proyectos.